Gizmodyne | November 16, 2007
The installation of the diswasher finally begins.
The first step: nailing a steam shield to the bottom of the counter.
I spent a lot of time leveling and fussing with the machine. Here you see me marking the plastic templates that come with the machine. It helps to set the height of the panel. It is marked [...]
Gizmodyne | November 12, 2007
Before I install the dishwasher panel I need to fit a piece of trim to cover the mortar bed. So back to the wood pile.
I need 11 feet of trim so I pulled a 12 footer from my stash and began the resaw process.
First: Metal detector boogie and pull nails. (About 50 this time)
Getting [...]
Gizmodyne | November 3, 2007
100 steps to a great finish
I have written about finishing douglas fir before, but I keep getting lots of questions about it so here I go.
Sand to 220. Get in the grooves.
Making the washcoat to prevent blotching .. 90% Mineral Spirits
Washcoat Part 2: 10% Boiled Linseed Oil
Apply Washcoat with cloth.
Inspecting the coat. If there are [...]
Gizmodyne | September 21, 2007
Domino
This is only my second project using the domino. This time I set the fence on top of the workpiece instead of setting both on the work surface. I was trying to center the tenon. It worked, but I am not sure if I mastered the technique since some of the parts are not perfectly [...]
