Gizmodyne | November 24, 2007
I started the tilt outs optimisticaly. I began by making filler strips to bring the hinges flush to the face frame.
Setting the hinge.
After lots of adjusting (3 hours) I got the drawer to fit reasonably well. The weird thing about these hinges is that they dont just tilt. They kind of tilt, slide down, [...]
Gizmodyne | November 21, 2007
tilt outs 1 Originally uploaded by gizmodyne
I installed the tilt out trays today. It took about 4 hours for the first one (which barely works) and 20 minutes for the second one. The challenge is getting these to work with inset drawers in a confined space.
Gizmodyne | November 16, 2007
The installation of the diswasher finally begins.
The first step: nailing a steam shield to the bottom of the counter.
I spent a lot of time leveling and fussing with the machine. Here you see me marking the plastic templates that come with the machine. It helps to set the height of the panel. It is marked [...]
Gizmodyne | November 15, 2007
Dishwasher Panel 3 Originally uploaded by gizmodyne
I finished 99% of the dishwasher installlation.
The whole story is here: